RF
Channel bandwidth*
3.5/5/7/10/14/20/ 28/30/40/50/56 MHz selectable**
Programmable Uplink and Downlink duty cycles
* For region-specific details, refer to the Compliance chapter of the airFiber AF-11FX User Guide at ui.com/download/airfiber
**Channel widths may vary according to country/region regulations.
Frequency accuracy
± 1 ppm
Operating frequency*
10.7-11.7 GHz
*Depends on regional regulations.
Max. conducted TX power*
30 dBm
*Depends on regional regulations.
System
Encryption
128-bit AES
Max. range
300+ km; actual performance depends on environment, installation and applicable regulatory limits
Max. throughput
1.2+ Gbps; actual performance depends on environment, installation and applicable regulatory limits
General
Brand
Ubiquiti
Pack quantity
1
Specification scope
Per device; sales pack quantity stated separately
Manufacturer part number
AF11-COMPLETE-LB
Hardware
Power method
Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-)
Terminal block direct-wire
Power supply
50V DC, 1.2A gigabit PoE adapter (Included)
RF connectors
(4) SMA Weatherproof, Two per Chain: TX 0, RX 0 (Chain 0) and TX 1, RX 1 (Chain 1)
(2) N-Type Waterproof, One per Duplexer
Certifications
CE, FCC, IC
NDAA Compliant
Yes
Networking interface
(1) GbE RJ45 port
(1) 10/100 MbE RJ45 port
Max. power consumption
36W
Supported voltage range
38-56V DC
Ambient operating temperature
-40 to 55° C (-40 to 131° F)
Software
Modes
SISO/MIMO*
* Comes with (1) Low-Band Duplexer pre-installed for SISO mode. For MIMO mode, a second Duplexer is available, model AF-11-DUP-L.
airFiber AF-11
Weight
2.3 kg (5 lb)
Mounting
AF-11G35 mount compatible
Dimensions
327 x 112 x 86 mm (12.9 x 4.4 x 3.4")
airFiber AF‑11G35
Gain
35 dBi
Weight
Without mount: 7.14 kg (15.74 lb)
With mount: 11.85 kg (26.12 lb)
Mounting
Pole mount
Frequency
10.3 to 11.7 GHz
Dimensions
811 x 811 x 460 mm (31.9 x 31.9 x 18.1")
Maximum VSWR
2:1
Polarization
Default: H/V
After rotating OMT: ± 45°
Wind loading
1538 N @ 200 km/h (346 lbf @ 125 mph)
HPOL beamwidth
2.5°
VPOL beamwidth
2.5°
Pattern regulatory
ETSI 302 217-4-2, Class 3, FCC Cat B
Wind survivability
200 km/h (125 mph)
Cross-pol isolation
35 dB
Shipping
Shipping weight
50.0 lb
Shipping dimensions (L × W × H)
37.4 × 35.5 × 19.25 in
Specifications apply to the listed model and configuration. Confirm compatibility and included accessories before ordering.
